Installing the charger – Polycom SpectraLink DCE201 User Manual
Page 12
SpectraLink 8002 Wireless Telephone User Guide
12
1725-36027-001_C.doc
Installing the Charger
Your SpectraLink 8002 Wireless Telephone is packaged with one of
two Charger models. The Desktop Charger will charge a single
handset with an installed Battery Pack. The Dual Charger will charge
the handset and a spare Battery Pack.
Place the Charger on a flat, horizontal surface. Plug the power supply
into the Charger and into an appropriate wall outlet. The user must
end any call in progress by pressing the
End Call
key on the handset
before placing it into the Charger. Handsets may be charged while on
hook or while turned off.
While the handset is charging while on hook, it will display its
extension number and
Charging…
as well as an animated battery icon
in the display’s upper right corner. The handset is fully operational
and will ring if called. When the handset is charging while turned off,
only
Charging…
and the animated battery icon will display and no
calls will be received. Note that during the handset charging cycle, the
Charging...
dots will be racing. When the handset is fully charged,
Charge Complete
will display.
Desktop Charger
The Desktop Charger will charge a single handset with an installed
Battery Pack. Place the handset in the Desktop Charger facing
forward. When the handset is placed correctly, the red indicator light
will come on. The indicator light will not come on when the slot is
empty, when the handset is improperly seated, or when the Desktop
Charger has no power applied. The indicator light will remain on
until the handset is removed.
Dual Charger
The Dual Charger is designed to charge the Battery Pack in the
handset and also charge an additional Battery Pack in the rear
charging bay. The handset has charging priority when both slots are
occupied. Place the handset in the front slot, facing forward. The
Battery Pack alone snaps into the rear charging bay. The LED
indicates the status of the Battery Pack in the rear bay.
When the handset is fully charged or is removed, the Battery Pack
will begin charging. Note that the time it takes for the Battery Pack to
charge will be lengthened if its charging cycle is interrupted by the
placement of a handset in the front slot.