Polycom SpectraLink DCE201 - Manual (Page 35)

Using the Basic Features of Your SpectraLink 8002 Wireless Telephone
1725-36027-001_C.doc 35
Clear forwarding on a line
1. Press LINE + [the line number],
2. Press the Fwd softkey and enter the forwarding destination.
3. Press the Fwd softkey again.
Do Not Disturb (reject all incoming calls)
Press FCN 2 . The handset will not ring for new incoming calls.
When the do-not-disturb feature is enabled, the standby screen will
display
Do Not Disturb .
Clear Do Not Disturb
Press FCN 2 again to resume ringing.
Redial the last number you dialed
1. Press START .
2. Press Redl .
3. Verify that the displayed number is the one you want and the line
# is valid.
4. Press START .
Adjust the headset volume
While the headset is plugged in, press the up/down volume buttons
on the side of the handset during the call.
End the call
Press the END key to return to the standby mode.