Turn the handset on, Turn the handset off, Unlock the keypad – Polycom SpectraLink DCE201 User Manual

Page 32: Lock the keypad, Place a call

SpectraLink 8002 Wireless Telephone User Guide

1725-36027-001_C.doc

Turn the handset on

Press and hold the

END

key until two chirps sound.

Turn the handset off

Press and hold the

END

key. One chirp will sound. If you are in a call,

hang up first, then turn off the handset.

Unlock the keypad

Press the

Unlk

softkey, then

Lock the keypad

While in standby mode press

FCN

, then

Select

Place a call

1. Press the

START

key and wait for a dial tone.

2. Dial the numbers and press the

START

key. Listen for the ring to

indicate the alerting of the called party.

Note: Line 1 is the default line
Example:

1
Line 1 [your dial number]

*To: [dialed number]

Hold Rej

Mute

This manual is related to the following products: