Panasonic KX-HCM230 - Manual (Page 8)

1) Mount the Flexible Stand firmly to the ceiling or the beam using the three screws (accessories).
2) Attach the Network Camera by screwing the threaded mount into the tripod mounting hole.
3) Adjust the position of the Network Camera and secure the Flexible Stand firmly.
4) Roll up the cables and Flexible Stand with the Self Bonding tape (accessories).
Ceiling Mounting
Make sure the Indicator is always in the upper right corner when you mount.
Note
Drive mounting screws into the wall. Be careful to avoid touching any metalwork (metal/wire laths etc.),
conduits or electrical cables buried in the wall.
CAUTION
• Please use proper screws fit for the material of the ceiling.
1)
3) 4)
2)
Caulk around
Flexible Stand
if you need
Self Bonding
tape
Please
waterproof
the rest
of the cable.
top
bottom
top
top
bottom
bottom
Ceiling Mounting Wall Mounting Flexible Stand Mounting
top
bottom
2002 Panasonic Communications Co., Ltd. All Rights Reserved.
Screen shots reprinted with permission from Microsoft Corporation.
ActiveX is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries.
All other trademarks identified herein are the property of their respective owners.
Trademarks
Ethernet is either a registered trademark or a trademark of Xerox Corporation in the United States and/or other countries.
PSQX2811XB.book 9 ページ ２００３年５月３０日 金曜日 午後４時３８分