Panasonic KX-HCM230 - Manual (Page 4)

4
5. Click [Save] on the Configuration window when finishing. The "Successful!" message boxes appear
and click [OK]. The following message box appears and have the links to Top Page and Setup Page
(Network window). Click [Top Page] and Top Page appears. Please refer to Operating Instructions for
the details.
Enter "http://IP address:Port No."
(When port number is 80 (default), you do not need
to enter it.)
in the address field and press [Enter].
Accessing from the web browser
Setup Page Top Page
If you are configuring in [Type 3], Top Page may not appear at this point. After the Network Camera is directly connected
with the modem, please check the Network Camera Access from the Internet on Page 32 in the Operating Instructions.
Notes
First viewing the image on the Internet Explorer may display a pop up Security Warning window. The window requests
your permission to download ActiveX
® Controls (OCX file) used to display Motion JPEG. Please refer to Page 38 in the
Operating Instructions.
Enter "http://IP address:Port No./config.html"
4. Select your target Network Camera from the list as shown on example (A) on the Network Camera List
window and click [Select]. The Configuration window appears. Please refer to Page 2 in this Getting
Started and enter the correct network parameters.
Click the language to change the display.
PSQX2811XB.book 4 ページ ２００３年５月３０日 金曜日 午後４時３８分