Pioneer DVR-541H-S - Manual (Page 62)

Playback 06
62
En
2 With ‘A (Loop Start)’
highlighted, press at the point you want
the loop to start.
3 With ‘B (Loop End)’ highlighted,
press at the point you want the loop to
end.
Playback immediately jumps back to the
start point and plays the loop round and
round.
• When playing a DVD-Video/Video mode
DVD, or from the HDD, the start and end
points of the loop must be in the same
title.
• To resume normal playback, select Off
from the A-B Repeat menu, or press
CLEAR if no menu OSD (such as the Play
Mode menu) is displayed.
Repeat play
There are various repeat play options,
depending on the kind of disc loaded, or if
you’re using the HDD for playback. It’s also
possible to use repeat play together with
program play to repeat the tracks/chapters
in the program list (see
Program play
below). 1
• Select ‘Repeat’ from the Play
Mode menu, then choose a repeat play
mode.
• To resume normal playback, select
Repeat Off from the Repeat Play menu,
or press CLEAR if no menu OSD (such as
the Play Mode menu) is displayed.
Program play
This feature lets you program the play order
of titles/chapters
2
/folders/tracks on a disc or
the HDD.
1 Select ‘Program’ from the Play
Mode menu, then ‘Input/Edit Program’.
The Input/Edit Program screen varies
according to the disc type. Below is the DVD
input screen.
Note
1 If you switch the camera angle during repeat play of a DVD-Video disc, repeat play is canceled.
ENTER
Play Mode
Search Mode
A-B Repeat
Repeat
Program A (Loop Start)
B (Loop End)
Off
ENTER
A L L
2 When playing a program list of DVD-Video chapters, chapters not included in the program list may be some-
times be played, depending on the disc.
ENTER
Play Mode
Search Mode
A-B Repeat
Repeat
Program Repeat Disc
Repeat Title
Repeat Chapter
Repeat Off
HDD DVD-Video CD Video CD Super VCD
WMA/MP3
ENTER
DVR640H_RLT_EN.book 62 ページ ２００６年４月１１日 火曜日 午後１２時２６分