Pioneer DVR-541H-S - Manual (Page 112)

The Initial Setup menu 14
112
En
G-Code CH Setting Next Screen Proceed to the next screen to assign channel
numbers to the guide channels as necessary. Look in
your TV guide to see which channel numbers should
be assigned to which guide channels. Press
ENTER
when your done to leave this screen.
Video In/Out Settings
Input Colour
System Next Screen Proceed to the next screen to set the input colour
system for the external input and the built-in TV
tuner. Use the
CH +/– buttons to change the preset.
On the default Auto setting the recorder can gener-
ally correctly detect whether the input signal is PAL,
SECAM, 3.58 NTSC or PAL-60, but in some cases you
may have to set it manually if the picture is displayed
incorrectly.
See also About the input color system on page 120 for more information on this setting.
Component Video
Out Interlace • Select if your monitor/TV is not compatible with pro-
gressive-scan video.
Progressive Select if your monitor/TV is progressive-scan compat-
ible. Check the operating instructions that came with
your monitor/TV if you’re not sure.
NTSC on PAL TV On NTSC discs will play correctly on PAL-only TVs.
Off • Use if your TV is already NTSC-compatible.
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 120 for related information.
Audio In
NICAM Select NICAM • Record the NICAM audio in a NICAM broadcast.
Regular Audio Record the non-NICAM audio in a NICAM broadcast.
(You can still switch the audio to record using the
AUDIO button before recording.)
Tuner Level Normal • Standard setting.
Compression Use if the audio level from the built-in tuner is exces-
sive, causing distortion.
Setting Options Explanation
DVR640H_RLT_EN.book 112 ページ ２００６年４月１１日 火曜日 午後１２時２６分