Pioneer DVR-541H-S - Manual (Page 34)

Recording 05
34
En
Using the built-in TV tuner
There are three different ways to select TV
channels. Note that you can’t change the TV
channel during playback, recording or
during recording standby.
• CH +/– buttons
• Number buttons
For example, to select channel 4, press 4
then ENTER ; for channel 34, press 3 , 4 ,
ENTER . 1
• CH +/– buttons on the front panel
Changing audio channels
You can change the audio channel of the
broadcast or external input signal.
• Press to change the audio type.
The current audio channel is displayed on-
screen.
• If the NICAM audio setting (see NICAM
Select on page 112) is set to NICAM and
you are watching a NICAM broadcast,
you can switch between
NICAM and
Regular (non-NICAM) audio.
• If the NICAM broadcast is bilingual, you
can also select the language.
• You can also select the language for a
non-NICAM bilingual broadcast.
• When watching a recording made from
an external input with Bilingual
recording selected (see External Audio
on page 113), you can switch the audio
channel between left (
L ), right ( R ) or both
( L+R ).
Note
• When recording to the HDD with HDD
Recording Format set to Video Mode On,
to DVD in Video mode, or on the
LPCM
setting, only one channel of a bilingual
broadcast is recorded. In this case,
decide which language you want to
record before recording by setting the
Bilingual Recording setting (see
Bilingual Recording on page 113).
Note
1 Channel presets are numbered 1 to 99.
CH
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
CLEAR
CLEAR
AUDIO
NICAM
Regular
NICAM A NICAM B
Regular NICAM A+B
A (L) B (R)
A + B (L+R)
L R
L+R
DVR640H_RLT_EN.book 34 ページ ２００６年４月１１日 火曜日 午後１２時２６分