Pioneer DVR-541H-S - Manual (Page 108)

The Video Adjust menu 13
108
En
Setting the picture quality
for disc playback
This setting determines how the picture will
look when playing discs.
Choosing a preset
1 With a disc playing (or paused),
press to display the Home Menu.
2 Select ‘Video Adjust’.
3 Select a setting.
There are six presets available:
• TV – suitable for LCD and cathode-ray
tube TVs
• PDP – suitable for plasma display
screens
• Professional – suitable for professional
monitors
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
You can press DISPLAY to see the individual
settings for the current preset ( TV , PDP or
Professional ).
Creating your own set
There are three user presets in which you
can save your own set of picture quality
settings for disc playback.
1 Follow Choosing a preset above and
select one of the user presets (Memory 1,
2 or 3).
2 Move the cursor down and select
‘Detailed Settings’.
3 Select the picture quality setting you
want to adjust.
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive.
• PureCinema – This setting optimizes the
picture for film material when the video
output is set to progressive. Usually this
is best left set to
Auto 1 ; try switching to
Auto 2 , On or Off if the picture appears
unnatural.
• YNR – Adjusts the amount of noise
reduction (NR) applied to the Y
(brightness) component.
HOME
MENU
ENTER
ENTER
Detailed Settings
TV
Detailed Settings
Memory1
Memory1
YNR
BNR
Motion Still
Off Max
PureCinma
Prog. Motion
Auto1
Off Max
Off Max
Detail
White Level
Max
Max
Off
Min
MNR
DVR640H_RLT_EN.book 108 ページ ２００６年４月１１日 火曜日 午後１２時２６分