Panasonic CF-T1 - Manual (Page 5)

5
Key Combinations
There are two Fn key functions as follows:
●
Fn key lock function
After
Fn is pressed once, it stays in the “pressed” position until another key is pressed.
This is convenient when it is difficult to press two buttons simultaneously.
●
Popup windows display ON/OFF
1
Run the Hotkey Settings.
Windows 2000
: Select [Start] - [Programs] - [Panasonic] - [Hotkey Settings].
Windows XP
: Select [start] - [All Programs] - [Panasonic] - [Hotkey Settings].
2
Set the parameters.
A.Use Fn key lock
Add the check mark if you want to enable the Fn key lock function.
The following Fn key lock function will then be enabled.
To use
Fn only once: 1
Press
Fn once. (Locked)
2
Press another key for combination.
(Lock released)
To use
Fn successively: 1
Press
Fn twice. (Locked)
2
Press another key for combination.
Fn key remains locked until
Fn is pressed once
more.
B.Notification
This setting is only available when [Use Fn key lock] is checked.
[Make sounds when Fn key is pressed]*:
Notifies the user with a sound when
Fn is pressed, locked, or released.
*(If MUTE is set, you will not hear a beep.)
[Show status on screen]:
Displays the Fn key status on the taskbar.
:
Fn is locked
:
Fn is not locked
C.Disable popup
Add the check mark if you want to turn the popup window display function OFF.
The full-screen display of [Command Prompt] screen or MPEG files may change to
a window display if
Fn + Fx* are pressed. To prevent this, turn the popup window
display function OFF.
3
Select [OK].
NOTE
●
The Fn key lock function also works with
Fn and other keys (e.g., Н, О) aside from
Fx*.
●
Each user can select separate settings for whether or not to use the Hotkey settings.
* “
Fx” indicates any function key from F1 to F10.
Hotkey Settings
A
B C