Panasonic CF-T1 - Manual (Page 18)

18
Standby/Hibernation Functions
Slide the power switch (A).
When [Standby]* 1 or [Hibernate] is selected as the setting for [When I close the lid of
my portable computer] in [Control Panel]* 2 - [Power Options] - [Advanced], the
computer will enter either the standby or hibernation mode when the LCD panel is
closed. Operation will resume when the LCD panel is opened. Even if the display is
closed after the computer has entered either the standby or hibernation mode,
operation will resume when the display is opened. If the computer does not resume
when the LCD panel is opened, slide the power switch.
*
1 Windows XP
: [Stand by]
* 2
Windows XP
: [Control Panel] - [Performance and Maintenance]
CAUTION
●
When resuming operation, avoid the following:
• Touching the keyboard (except for password input), pointing device (touch pad,
touchscreen*, external mouse, etc.), or power switch.
• Connecting or disconnecting the AC adaptor.
• Closing or opening the display.
* Only for models with touchscreen.
●
After the display returns, the computer needs about 15 seconds to reinitialize.
Do not shut down or restart Windows, or enter either the standby or hibernation
mode again during this time, as this may subsequently cause Windows to operate
abnormally.
NOTE
● Windows 2000
When the computer enters standby/hibernation mode and then resumes while a
USB 1.1 device (e.g., USB floppy disk drive (optional)) is connected, a device
disconnection warning message may appear on the screen, but this will not impede
the computer’s operation.
Resuming Operation