Panasonic CF-T1 - Manual (Page 39)

39
SD Memory Card/MultiMedia Card
D. Set and eject*
Add the check mark if you want to set and eject the SD memory card instead of
entering a password.
* The setting method is set separately for each computer. Different SD memory
cards may not use different setting methods on the same computer. To change
only the setting for [Use when starting computer], change the setting in
[Security] menu of the Setup Utility.
(
Ÿ page 58
)
6
Select [Restart the computer after entering settings], then select
[Finish].
7
Change the settings as necessary.
Operation differs depending on the setting in step 5 .
CAUTION
●
An SD memory card with the above settings can be used as an ordinary memory
card in other devices as well. When using the SD memory card in another device,
do not delete [Private] folder. Doing so will cancel [Use when logging on to
Windows].
If you add the check mark for [Use when starting computer] in step 5 :
Enter the Supervisor Password, then select [OK].
1
Enter the Supervisor Password, then press
Tab .
2
Reenter the Supervisor Password entered in step
1
, then select [OK].
3
Select [Yes] on the confirmation screen.
If you add the check mark for [Use when logging on to Windows] in step 5 :
1
Enter the user name, then press
Tab .
2
Enter the password, then press
Tab .
3
Reenter the password entered in step
2
, then select [OK].
4
Select [Yes] on the confirmation screen.