Panasonic BL-WV10A - Manual (Page 18)

1 Names and Locations
18
Programming the remote control
The remote control can be used to turn a television on and off, and to switch the
television’s video input selection. If your television is not a Panasonic television,
you can set the manufacturer’s code for the remote control.
While holding down [POWER], enter the 2-digit code found in the chart below that
corresponds to your TV. Release [POWER] after you have entered the code.
Note
• When using the remote control to operate a television, aim the remote control
at the television.
Code Manufacturer Code Manufacturer
01
02 Panasonic
Quasar 10 Sanyo
Fisher
03 Magnavox
Sylvania
Philips 11 JVC
04 Zenith 12 Hitachi
05 Thomson
RCA
GE 13 Mitsubishi
06
07 Sharp 14 Samsung
08 Sony 15
16
17 Goldstar
LG
09 Toshiba 18
19 Samsung
[POWER]
[INPUT SELECT]
Number keys