Panasonic BL-WV10A - Manual (Page 117)

6 Setup Menu
[For assistance, please call: 1-800-272-7033] 117
Using the Sensor
Sets the use of the sensor.
Note
• When a remote camera’s IP address setting is changed, set the camera’s
sensor setting to the desired setting once again.
• An attempt to disable sensor use for a camera set for continuous sensor
recording will display the following error message: [This sensor is used for
sensor recording. Turn off the record program.] will be displayed. To turn sensor
use off, first erase continuous sensor recording settings (see page 84).
• An attempt to disable sensor use for a camera set for timer sensor recording
will display the following error message: [This sensor is used for timer
Setting Description
Sensor Choose to turn sensor use on or off.
Turn sensor use on for sensor recording or Sensor Alert.
• Sensor use cannot be turned on of password saving is
turned off. To use sensors, turn password saving on
(page 115).