Panasonic KX-TG8231 - Manual (Page 46)

Useful Information
46 For assistance, please visit http://www.panasonic.com/help
Answering system
The 2nd caller’s
information is not displayed
during an outside call. L In order to use Caller ID, Call Waiting, or Call
Waiting Caller ID (CWID), you must first contact
your service provider/telephone company and
subscribe to the desired service.
After subscribing, you may need to contact your
service provider/telephone company again to
activate this specific service, even if you already
subscribed to both Caller ID and Call Waiting
with Caller ID services (CWID).
Problem Cause/solution
The unit does not record
new messages. L The answering system is off. Turn it on (page
30).
L
The message memory is full. Erase
unnecessary messages (page 31).
L If you subscribe to the voice mail service,
messages are recorded by your service
provider/telephone company not your
telephone. Change the unit’s “
Ring count
”
setting or consult your service provider/
telephone company (page 35).
I cannot operate the
answering system with the
handset. L The base unit or another handset is being used.
Wait for the other user to finish.
L
A caller is leaving a message. Wait for the caller
to finish.
L The handset is too far from the base unit. Move
closer.
When I try to operate the
answering system with the
base unit, the ANSWER
ON indicator on the base
unit flashes for a few
seconds and I cannot
operate the answering
system.
L
Another handset is being used. Wait for the
other user to finish.
L A caller is leaving a message. Wait for the caller
to finish.
Problem Cause/solution
TG8231_8232.book Page 46 Thursday, July 19, 2007 3:22 PM