Panasonic KX-TG8231 - Manual (Page 12)

Preparation
12 For assistance, please visit http://www.panasonic.com/help
If you subscribe to a DSL service
Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the
telephone line jack in the event of the
following:
– Noise is heard during conversations.
– Caller ID features do not function
properly.
Battery installation
and replacement
Important:
L
Use only the supplied rechargeable
batteries noted on page 3, 6.
L
USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Ensure correct polarities (S, T)
when installing the batteries.
L
Wipe the battery ends (S, T) with a
dry cloth.
L When installing the batteries, avoid
touching the battery ends (S, T) or
the unit contacts.
L When replacing batteries, we
recommend using the Panasonic
rechargeable batteries noted on page
4, 6.
1 Press the notch on the handset
cover firmly, and slide it in the
direction of the arrow.
2 Insert the batteries negative (T) end
first. Close the handset cover.
Note:
L
When replacing batteries, remove the
old batteries.
Noise filter
To single-line
telephone
jack (RJ11C)
Rechargeable Ni-MH ONLY
TG8231_8232.book Page 12 Thursday, July 19, 2007 3:22 PM