Philips CT9A9R - Manual (Page 54)

Tools 53
Local settings
To set the local time zone. The screen displays a world
map with the current date and time. A vertical
highlight in orange indicates the current zone on the
map, and a text bar shows the display with ‘GMT’ and
the current cities.
Move the highlight with
< / > key to update other
information in real time.
You can access the following options:
Foreign settings
To set the foreign time zone. The operations and
options are the same as Local time zone. However,
Set time option is not available in the menu.
Switch local/foreign
Press , or C Change to switch times between the
local and foreign clocks.
Stop watch
Your phone features a stop watch and the minimum
unit is 0.1 second.
The starting time is 00:00.0, in the format “mm:ss.n”,
where mm stands for minutes of the watch, which can
be any number from 0 to 59; ss stands for seconds,
a number between 0 and 59; n stands for 0.x second,
x being any number from 0 to 9. The stopwatch will
start the timing when you press
C Start or , . You can
pause the timing, press C Pause , to resume press C
Go , to stop the timing, press c Stop .
Countdown
This feature is very similar to the alarm clock,
except that you will be alerted of the remaining time,
and the phone will emit an alarm at the end of the
countdown. The alarm tone is the same as your alarm
clock. The minimum time is 1 minute. The format of
the time is
hh:mm:ss , and the maximum time input is
23 hours 59 minutes 59 seconds.
Enter the time with the numeric keypad and start the
countdown by pressing
, key or the C Options > go .
Select Choose the current time zone as
the local setting.
Set time Open time editor screen and open
date editor screen.
Daylight saving Turn summer time on or off.
City list Open an information screen with
a list of cities in the currently
highlighted time zone.
Philips_XRazr.book Page 53 Friday, March 23, 2007 6:46 PM