Philips CT9A9R - Manual (Page 10)

Getting Started 9
When the phone is switched on without a SIM card,
users can access the main menu by pressing
, or C ,
or make SOS emergency number via c or ( .
Switching on the phone
To switch on the phone, long-press the ) key.
Enter the PIN code if required (the 4 to 8 digit
secret code of your SIM card). It is preconfigured and
provided to you by your network operator or retailer.
For more information on PIN code, see “Security” on
page 73.
If you enter an incorrect PIN code 3 times in
succession, your SIM card will be blocked. To unblock
it, you must obtain the PUK code from your network
operator.
Switching off the phone
At all times, you can long press ) to switch off the
phone.
Charging the battery
Your phone is powered by a rechargeable battery. The
new battery is partially charged. A sound alert will be
emitted to warn you when the battery level becomes
low.
We recommend that you do not remove the battery
when the phone is switched on as you may lose all your
personal settings as a result. If you do remove it, the
date and time settings are only memorized for a short
while. As such, you need to reset the information after
you have installed the battery back again.
Once the battery and battery cover are installed, you
can charge the phone. Plug in the connector as shown
below. Then plug the other end into an AC power
socket.
Philips_XRazr.book Page 9 Friday, March 23, 2007 6:46 PM