Philips CT9A9R - Manual (Page 12)

Calling 11
2. Calling
Make a call
You can make a call only when the network name
appears on the screen. If there is no network name on
the screen, you need to reregister.
From the idle screen
1. In idle mode, enter the phone number using the
keypad. To correct an error, press
C .
2. Press ( to dial.
3. Press ) or c End to hang up.
For an international call, long press 0 to enter the
“+” sign for the international prefix.
Using the phonebook
1. Press - in idle mode.
2. Select a contact in the list.
3. Press ( : the selected number is dialed.
4. Press ) or c End to hang up.
Make an international call
1. Long press 0 until “+” appears on the screen.
2. Enter the country code.
3. Enter the area code (normally without the 0 in
front), followed by the phone number.
4. Press ( to call directly.
Answer, reject, and end a call
When receiving a call, the number of the caller may be
displayed, depending on whether or not the person
calling has chosen to display his or her ID. If the
number is stored in the selected phonebook, then the
corresponding name is displayed instead of the
number.
• Answer the call: press
( .
• Reject the call: press ) or long press volume side
keys.
• Hang up: press ) .
The phone will not ring if in Silent mode.
Philips_XRazr.book Page 11 Friday, March 23, 2007 6:46 PM