Panasonic PT-DZ6710 - Manual (Page 40)

Appendix
Technical Information
E
NGLISH - 40
3. Click OK.
Q User mode
A user can change password only. Enter your old
password and new password, then click OK.
J Projector Control
Q Basic control
Click the Basic control tab on the top.
POWER Switches projector ON or STANDBY.
SHUTTER Temporary halt the projection.
OSD Turn on/off the on screen display.
SYSTEM Changes colour system.
INPUT SELECT
Changes terminal of input signal.
Q Detail control
Click the Detail control tab on the top. You can
control the projector as same as controlling the
remote control.
User account
New setting
User name Enter new user name.
Password Enter new password.
Password(Retype) Enter the new password again.
User account
New setting
User name Enter new user name.
Password Enter new password.
Retype Enter the new password again.
Web browser buttons Remote control buttons *1
POWER: ON/STANDBY POWER ON and STANDBY
SHUTTER: ON/OFF SHUTTER
OSD: ON/OFF ON SCREEN
INPUT SELECT: RGB1/RGB2/
DVI-D/VIDEO/S-VIDEO/SDI RGB1/RGB2/DVI-D/VIDEO/
S-VIDEO/SDI
AUTO SETUP AUTO SETUP
MENU MENU
F G I H ENTER F G I H ENTER
DEFAULT DEFAULT
ASPECT
ASPECT
See “ASPECT” on page 18.
Numeric buttons Numeric buttons
LENS FOCUS/ZOOM/SHIFT
TEST PATTERN
TEST PATTERN
See “TEST PATTERN” on page 32.
Indicates projecting status. Even when the
screen is cleared by pressing the ON
SCREEN button of the remote control, the
information will be displayed.
Adjustable items