PS Audio POWERPACK 1500 MKII - Manual (Page 5)

4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 [email protected] www.psaudio.com
®
Getting Started 5
©2009 PS Audio International Inc. All rights reserved.
Installation & Operating Instructions
Owner’s Reference PowerPack 1500 MKII
Examine the packing carton for damage upon receipt. Once the UPS has been
removed from its shipping container, everything inside the package should be
inspected for damage that may have occurred while in transit. Notify the carrier
immediately if any damage is observed.
The box should include the following
• UPS and Input Power Cord
• User Manual
• PowerPlay and Audio Video Power Center Communications Cable
• Retain the packing for future use or disposal of property.
Item Panel Indicator Description
1 Main On Switch
(Silence/Test) “ | ” Turn on UPS, Silence and Self-Test
2 Main Switch Off “ ” Turn off UPS
3 Capacity Indicator LED bar shows load size and battery capacity
4 AC Buck Mode Indicator Continuous Amber LED display AC buck
5 AC Normal Indicator Continuous Green LED display AC normal
6 AC Boost Mode Indicator Continuous Amber LED display AC boost
7 Backup Mode Indicator Continuous Green LED displays backup mode
8 Battery Replace Indicator Continuous Red LED displays battery failure
9 UPS Warning / Fault Indicator
10 RS232 Communication
Interface Displays Flashing/Continuous Red LED Trans-
mits UPS status and receives control
11 Site Wire Fault Indicator Commands from the computer system. The
LED will illuminate upon hot and neutral polarity
reversal, or a bad ground connection.
2.1 Unpacking
& Inspection
2.2 Overview