PS Audio POWERPACK 1500 MKII - Manual (Page 11)

4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 [email protected] www.psaudio.com
®
Getting Started 11
©2009 PS Audio International Inc. All rights reserved.
Installation & Operating Instructions
Owner’s Reference PowerPack 1500 MKII
Restore electrical power to connected equipment by re-plugging the UPS power
cord into a wall outlet
Press and hold both the main on switch “I” and the main off switch “ ” on the
front panel for more than 3 seconds while the UPS is in the off status. The UPS
will now enter parameter configuration mode.
• When the UPS enters into the configuration mode, the turn on of six different
status indicator LEDs represent different parameter being programmed.
• Different parameter can be selected by pressing and holding the main off
switch “ ” for more than 3 seconds.
•Different settings can be selected by pressing and holding the main on switch
“I” for more than 3 seconds.
• To Exit the configuration mode:
Press and hold both the main on switch “I” and off switch “ ” for more than 3
seconds.
Level Indicator
Status Indicator
2.6 Operating
Parameter Setting
2.6.1 Configuration
Mode
2.6.2 Display and
Control Switch
2.6.3 End of
Configuration
mode