Recording 06, Vcr plus+ programming with the power off, Extending a timer recording in progress – Pioneer DVR-520H User Manual
Page 51

Recording
06
51
En
VCR Plus+ programming with the power off
You can enter a PlusCode number when the recorder is
in standby. Note that the recording is always made to the
HDD. If you want to record to a DVD disc, you’ll need to
switch on the power and use the full VCR Plus+ program
screen.
Important
• You can’t use this feature until you have set up the
guide channels. See VCR Plus+ CH Setting on
page 96.
• You can’t change the recording mode.
• You can’t program daily or weekly timer recordings.
1
Press ‘VCR Plus+’.
The front panel display shows the current recording
mode and prompts you to enter the PlusCode number.
2
Use the number buttons to enter the PlusCode
number.
• To clear the last digit entered, press
CLEAR.
3
Press ENTER.
The display shows the timer settings:
Date
Start time
End time
HDD and Recording
channel.
• If
CODE ERROR appears in the display, check that
the PlusCode number is correct and that the guide
channel is set (see VCR Plus+ CH Setting on
page 96), then set the timer recording again.
• If
CAN’T SET appears in the display, it means that
although you entered a valid PlusCode number, the
program has already finished.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
Moving the end time by 30-minute blocks
1
During timer recording, press and hold
ì REC for
three seconds.
The timer indicator disappears from the front panel
display.
2
Press
ì REC repeatedly to extend recording in 30
minute increments.
Programming a new end time
1
During timer recording, press TIMER REC to
display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU, select Timer
Recording, then Timer Recording (View)).
ENTER
CLEAR
VCR Plus+
P L US CODE
2 9 32 4
HOME
MENU
ENTER
CLEAR
REC
PREV
NEXT
STOP REC
TIMER REC
ì
HDD Remain
---h--m(FINE)
DVD Remain
0h43m(FINE)
New Input
Date Start Stop CH
Mode Rec to Confirm
1/1
Timer Recording
12/13 MON
12/14 TUE
7:00 PM
9:00 PM
8:00 PM
10:00 PM
32
43
FINE
FINE
HDD
HDD
OK
OK