Pentax 30 - Manual (Page 53)

51
4
Tak
ing Pi
cture
s
Taking Pictures
When an SD Memory Card has been inserted, all images are saved to
the card. Images are saved to the Built-in memory when no card has
been inserted.
In Program mode (e), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can change the
function settings if necessary.
1
Press the four-way controller (3) in Capture mode.
The virtual mode dial appears.
2
Use the four-way controller (45)
to select [e].
3
Press the OK button.
The camera is ready to take the picture.
4
Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.35 to p.50) for details of how to set the
functions.
5
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus.
6
Press the shutter release button.
The picture is taken.
Setting the Functions (Program Mode)
Taking Still Pictures 1p.22
5, 6
1, 2
3
4
OK O K