Pentax 30 - Manual (Page 101)

99
6
Editin
g / Se
tting
s
The USB Connection mode is changed depending on whether the USB
cable is to be connected to a printer (PictBridge) or a computer.
1
Select [USB Connection] on the [B Set-up] menu.
2
Use the four-way controller (45) to select [PC] or
[PictBridge].
3
Press the OK button.
The camera is ready to be connected to a computer or printer.
You can reset all the settings other than the date / time and
language/
.
1
Select [Reset] on the [B Set-up] menu.
2
Press the four-way controller (5).
The Reset screen will be displayed.
3
Use the four-way controller (2) to select [Reset].
4
Press the OK button.
The camera is ready to take or play back images.
Changing the USB Connection Mode
Do not connect the camera to your PC while [PictBridge] is selected
for the USB connection mode.
Resetting to Default Settings [Reset]
The SIMPLE menu is displayed by pressing the MENU button after
performing the above resetting.
F o r m a t
D a t e A d j u s t
U S B C o n n e c t i o n
S c r e e n S e t t i n g
S e t - u p
MENU
0 5 / 0 3 / 2 0 0 4
E n g l i s h
PC
OK S I M P L E E x i t O K