PYLE Audio SOUNDPOINT IP 450 - Manual (Page 45)

Using the Basic Features of Your Phone
3 - 5
To answer a call using the handset:
>> Pick up the handset.
To answer a call using Hands-Free Speakerphone mode:
>> Do one of the following:
— Press .
— With the handset on-hook, press
(next to the
flashing green status indicator).
— Press the Answer soft key.
To answer a call using the headset:
>> Press .
If Headset Memory Mode is activated, press or the
Answer soft key.
Answering When in Another Call
If you have an active call, and an incoming call arrives on the same line, do one
of the following:
• If your phone is configured for a single Line Key per line:
— You may hear a call waiting tone, and you will see the second call
appearance. Caller information for the incoming call appears on the
screen.
• If your phone is configured for multiple Line Keys per line:
— You may hear a call waiting tone, the second Line Key indicator fast
flashes green, and an incoming call icon appears. Caller information
for the second Line Key appears on the bottom line of the screen.
• If your phone is configured for shared lines:
— You may hear a call waiting tone, the second Line Key indicator will
fast flash green, and an incoming call icon appears on the second Line
Key.
Note If “Handsfree mode disabled” appears on the screen after you press the
speakerphone key
,
your system administrator has disabled the speakerphone on
your phone.
Note If your phone is configured for shared lines, the Reject soft-key is replaced by a
Silence soft key and there is no Forward soft-key. To stop the incoming call from
ringing, press the Silence soft key.