PYLE Audio SOUNDPOINT IP 450 - Manual (Page 22)

User Guide for the SoundPoint IP 450 Desktop Phone
2 - 6
10. Press to return to the idle screen.
Enabling the Headset Memory Mode
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press .
2. Select Settings > Basic > Preferences > Headset... > Headset Memory...
3. Scroll to select Enabled, and then press the Select soft key.
4. Press to return to the idle screen.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
>> Press twice.
The flashing headset icon on the screen or a flashing headset key indicates that
the headset mode is activated. Pressing or the Answer soft
key to receive a call will now connect to your headset automatically.
Selecting the Correct Headset for Electronic Hookswitch
This feature allows you to answer your phone when you are using a headset.
For information on supported headsets to provide electronic hookswitch features for
placing, answering, and ending calls, go to
www.polycom.com/support/voice and
enter “Headset Compatibility List” in the Knowledge Base text box or contact your
system administrator.