Premio Computer Apollo/Shadowhawk - Manual (Page 99)

Intel Desktop Board D845HV/D845WN Technical Product Specification
76
2.10 Mechanical Considerations
2.10.1 D845HV Form Factor
The D845HV board is designed to fit into either a microATX or an ATX-form-factor chassis.
Figure 17 illustrates the mechanical form factor for the D845HV board. Dimensions are given in
inches [millimeters]. The outer dimensions are 9.60 inches by 9.60 inches [243.84 millimeters by
243.84 millimeters]. Location of the I/O connectors and mounting holes are in compliance with
the ATX specification (see Section 1.4).
✏
NOTE
When installing the board in a microATX chassis, make sure that peripheral devices are installed
at least 1.5 inches above the main power connector, the diskette drive connector, and the IDE
connector, and the DIMM sockets.
OM11436
6.10[154.94]
3.10[78.74]
0.55[13.97]
0.80
[20.32]
9.05[229.87]
0.00
6.50[165.10]
8.80
[223.52]
5.20[132.08]
2.85[72.39]
2.60
[66.04]
0.00
Figure 17. D845HV Board Dimensions