Premio Computer Apollo/Shadowhawk - Manual (Page 46)

Product Description
23
For information about Refer to
Obtaining the PC Serial Presence Detect (SPD) Specification Section 1.5, page 18
Table 6 lists the supported DIMM configurations.
Table 6. Supported Memory Configurations
DIMM
Capacity Number of
Sides SDRAM
Density SDRAM Organization
Front-side/Back-side Number of
SDRAM devices
32 MB SS 64 Mbit 4 M x 16/empty 4
64 MB DS 64 Mbit 4 M x 16/4 M x 16 8
64 MB SS 64 Mbit 8 M x 8/empty 8
64 MB SS 128 Mbit 8 M x 16/empty 4
96 MB DS 64 Mbit 8 M x 8/4 M x 16 12 (Notes 1 and 2)
96 MB DS 128/64 Mbit 8 M x 16/4 M x 16 8 (Notes 1 and 2)
128 MB DS 64 Mbit 8 M x 8/8 M x 8 16 (Note 1)
128 MB DS 128 Mbit 8 M x 16/8 M x 16 8 (Notes 1 and 2)
128 MB SS 128 Mbit 16 M x 8/empty 8
128 MB SS 256 Mbit 16 M x 16/empty 4
192 MB DS 128 Mbit 16 M x 8/8 M x 16 12 (Notes 1 and 2)
192 MB DS 128/64 Mbit 16 M x 8/8 M x 8 16 (Notes 1 and 2)
256 MB DS 128 Mbit 16 M x 8/16 M x 8 16 (Notes 1 and 2)
256 MB DS 256 Mbit 16 M x 16/16 M x 16 8 (Notes 1 and 2)
256 MB SS 256 Mbit 32 M x 8/empty 8
512 MB DS 256 Mbit 32 M x 8/32 M x 8 16 (Notes 1 and 2)
Notes:
1. If the number of SDRAM devices is greater than nine, the DIMM will be double sided.
2. Front side population/back side population indicated for SDRAM density and SDRAM organization.
3. In the second column, “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers
to single-sided memory modules (containing one row of SDRAM).
✏
NOTE
For D845HV boards with two DIMM sockets, the maximum total system memory is 2 GB.