Pantech DM-P205 User Manual
Page 44
42
CONTACTS
SPEED DIAL
In Idle Mode, calls can be placed to numbers stored
in Speed Dial by pressing/holding the corresponding
number key. To create a two-digit speed dial number,
press the first number, then press and hold the second
number.
1. Press
[MENU]
.
2. To assign a phone number to a speed dial location,
select the number location and press
[ASSIGN].
NOTE:
• “1” KEY IS USED FOR THE ONE-TOUCH VOICEMAIL DIALING FEATURE.
• “UNASSIGNED” APPEARS IF THE KEY IS AVAILABLE.
3. Use the NAV KEY to select an entry, then press
.
4. When the message “Speed Dial for [Name] is now
set. To access, click the number and hold for 2 sec.” is
displayed, press
[OK].
FOR EXAMPLE:
SETTING A SPEED DIAL NUMBER THROUGH YOUR CONTACT LIST.
1. FROM CONTACTS, ACCESS CONTACT LIST.
2. SCROLL THROUGH CONTACT ENTRIES WITH THE NAV KEY, THEN
PRESS
[OPTIONS] TO SELECT “ADD SPEED DIAL #.”
3. SCROLL THROUGH SPEED DIAL ID #S WITH THE NAV KEY, MAKE A SELECTION
THEN PRESS
[OK].
4. WHEN “SPEED DIAL FOR [NAME] IS NOW SET. TO ACCESS, CLICK THE
NUMBER AND HOLD FOR 2 SEC.” APPEARS, PRESS
[OK].
•
If a phone number is already assigned to the key, press
[DELETE] to delete.
CH 4