Pioneer PRV-LX10 - Manual (Page 71)

71
PRV-LX10
En
English
Disc Duplication
Creating Image Files from a Disc
Use the Function Menu’s APP section = [Cpy/
Impt/Bkup] = [Disc Image Copy] = [Source]
command to specify the disc to be used in creating
an image file. Use the [Input Image Name]
command to enter the file name. The file is saved
under the entered file name to the imagefiles folder,
a folder that can be accessed via FTP. The disc
cannot be removed until the image file has been
created.
Using APP section = [Cpy/Impt/Bkup] =
[Disc Image Copy] to select Source
Using APP section = [Cpy/Impt/Bkup] = [Disc Image Copy]
= [Input Image Name] to enter a file name
Note 1:
For characters usable in the names of image files,
see section “About File Names” (page 94).
Note 2:
When the [Input Image Name] command is used, it
automatically displays a default name that does not
equal duplicate an already existing file name
(example: dscXXXXX.img, where the “X” represent
numbers). When file creation is executed, the new
file name will be displayed with the numerals
automatically modified. However, once an image file
name has been changed, it cannot be handled by
automatic processing.
Creating Discs from Image Files
Use the Function Menu’s APP section = [Cpy/
Impt/Bkup] = [Image Copy/Del] = [Source]
command to specify image file to be copied and use
the [Destination] command to specify the disc to
write the file to. The [Source] command displays all
the files saved in the imagefiles folder (a folder
accessed using FTP).
Note:
Image files that are 4.7 GB or larger cannot be
copied to disc.
Using APP section = [Cpy/Impt/Bkup] =
[Image Copy/Del] to create a disc from an image file
Deleting Image Files from a Hard Disk
Use the Function Menu’s APP section = [Cpy/
Impt/Bkup] = [Image Copy/Del] = [Source]
command to specify the disc whose image files are
to be deleted. The [Source] command displays all
the files saved in the imagefiles folder (a folder
accessed using FTP).
Note:
Formatting a hard disk (see “HDD Tools” on page
31) deletes all image files on the disk.
Using APP section = [Cpy/Impt/Bkup] =
[Image Copy/Del] to delete image files