Pioneer PRV-LX10 - Manual (Page 55)

55
PRV-LX10
En
English
DVD Menu Editing
This unit is equipped with a number of DVD menu
layouts that are selected with the Function Menu’s
EDIT section
= [DVD Menu] command, and
associated with a recorded image for convenient
production of DVD-Video discs.
The constructed menu will be the same TV system
(NTSC or PAL) as that currently selected. Opening
clip and idle clip can be set only for HDD projects. A
total of 1GB (about 10 minutes at highest rate) can
be set. However, even if the same clip is selected,
the total will be computed as separate clips.
The DVD menu data set here is reflected in [Make
Disc], [Make Image] and [Finalize] command.
Also, by using the save to default menu and read
commands, the menu data for the currently selected
project can be saved to the default DVD menu, or
read from the default DVD menu.
The default DVD menu is always used for new
projects. A standard menu can be registered as the
default DVD menu for efficient production of DVD
discs without having to edit menus each time.
The preview and disc emulation functions can be
used to confirm the contents before burning a DVD
disc. Also, if the playback mode is field playback,
output will be for one field only, and menu characters
may not appear correctly.
Font Selection
Use the Function Menu’s EDIT section = [DVD
Menu] = [Menu Type/Font] = [Font] commands
to select fonts for DVD menus.
EDIT section = [DVD Menu] = [Menu Type/Font]
= [Font]
DVD Menu Type Selection
Use the Function Menu’s EDIT section = [DVD
Menu] = [Menu Type/Font] = [Menu Type]
command to select whether to make the DVD menu
a title menu, chapter menu, to add no menu, or a
title & chapter menu.
Regarding the title and chapter menus: when a title
is selected on the title menu, that title’s chapter
menu will be displayed. In this case, depending on
the design, a button may be added to the chapter
menu for direct access to the title menu. However, if
only one chapter exists within the title, no chapter
menu will be created.
EDIT section = [DVD Menu] = [Menu Type/Font]
= [Menu Type]