Pioneer PRV-LX10 - Manual (Page 42)

42
PRV-LX10
En
2 Canceling finalization
Finalization can be canceled by selecting the EDIT
section
= [DVD Disc] = [Unfinalize] command.
The PRV-LX10 can only canceling finalization discs
that it has been finalized on the PRV-LX10 or PRV-
LX1.
Finalization cannot be canceled for two drives
simultaneously.
Note:
The DVD menu information is lost when a disc is
canceled finalization. When a disc has been canceled
Finalization, use the EDIT section
= [DVD Menu]
command to set the DVD menu again.
Recording
APP section = [Auto Capture] = [EDL Load/Delete]
APP section = [Auto Capture] = [EDL Save]
Note 1:
Edit lists can be composed outside of the recorder
and imported (see page 72 “Inporting Image Data,
Edit Lists”).
Note 2:
If [EDL] is used when target drive is set to HDD,
initialize and finalize commands are ignored.
EDIT section = [DVD Disc] = [Initialize] = [Initialize]
Initialize confirmation dialog
Initialize progress bar (appears during initialization)
Recording to DVD Discs
Data can be recorded on an unused or not finalized
DVD-R or DVD-RW disc.
A finalized DVD-RW disc must be initialized or
finalization must be canceled before reuse.
1 Disc initialization
Use the EDIT section
= [DVD Disc] = [Initialize]
command to initialize DVD-RW discs. Select
“Quick Format” or “Full Blank” (all previously
recorded material is erased). “Full Blank” takes
30 minutes to 1 hour to complete.
The constructed edit list can be saved with a name
(*.edl) created with the [Auto Capture]
= [EDL Save]
command on the APP section. Also, a saved edit list
can be selected and loaded with the [Auto Capture]
=
[EDL Load/Delete] = [Load] command. To delete an
edit list, using the [Auto Capture] = [EDL Load/
Delete] = [Delete] command on the APP section.