Pride Mobility Jet 10 User Manual

Page 19

Jet 10/Rev H/Feb03

www.pridemobility.com

I V . Y O U R J E T 1 0

MANUAL FREEWHEEL LEVERS

For your convenience, your Jet 10 is equipped with two manual freewheel levers. See figures 5 and 6. These

levers allow you to disengage the drive motors and maneuver the chair manually.

WARNING! Do not use your power chair while the drive motors are disengaged unless you are in the

presence of an attendant! Do not disengage the drive motors when your Jet 10 is on an incline.

The chair could roll down on its own, causing injury.

To engage or disengage the freewheel feature:

1. Turn the manual freewheel levers inward to disengage the drive motors. See figure 5.

2. Turn the manual freewheel levers outward, to engage the drive motors. See figure 6.

If a lever is difficult to move in either direction, rock your Jet 10 back and forth slightly. The lever should then move

to the desired position.

CAUTION! It is important to remember that when your Jet 10 is in freewheel mode, the braking

system is disengaged.

Figure 6. Drive Engaged

Figure 5. Drive Disengaged

MANUAL FREEWHEEL LEVERS