Maintenance, General maintenance – Polaris 600 RMK User Manual

Page 97

MAINTENANCE

General Maintenance

Drive Belt Installation

1. Drop the drive belt over the

drive clutch and pull back the

slack.

NOTE: To ensure satisfactory belt

life, install belts so they

operate in the same

direction of rotation by

positioning the

identification numbers so

that you can read them. If

required, separate the

sheaves as outlined in the

belt removal procedures.

2. Rotate the L-wrench counter-clockwise to tighten the sheaves

while working the belt to the outer edge of the sheaves.

3. Remove the wrench and store it in the tool kit.
4. Reinstall the side panel.
5. Close and secure the hood.