Polaris 600 RMK - Manual (Page 78)

+
+
75
MAINTENANCE
Lubrication
Driveshaft Bearing
Inject grease into the fitting on the
speedometer sensor housing until grease
purges from the seal on the inside of the
tunnel. This should take approximately two
pumps. Do not use more than four pumps.
Throttle Cable
Lubricate the throttle cable lightly with
grease or oil. With the engine off, turn
the handlebars to the left and lubricate
liberally as shown.
Choke and Cable
Lubricate the choke slide and cables
lightly with oil or grease. Before
turning the engine off, operate the choke
intermittently to draw moisture out of
the choke plunger area and reduce the
possibility of the choke becoming
frozen.
+