Panasonic Panafax UF-5950 - Manual (Page 57)

Sending Documents
57
Voice Mode Transmission
B
a
si
c O
p
er
at
io
n
s
On-Hook Dialing
For On-Hook Dialing, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first, then press to
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing, and you wish to change to Tone dialing in the middle of dialing,
press (represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
You will hear dial tone through the monitor speaker.
* MONITOR *
❚
3
Dial the telephone number from the keypad.
Ex:
* DIALING *
5551234
❚
4
When you hear a beep,
ON LINE * XMT *
5 5 5 1 2 3 4
PAUSE
TONE