9 day-to-day operation – Philips DCR 9001/22 User Manual

Page 21

9.1 Switching your receiver ON,

or to LOW POWER or STAND-BY

In standby mode, there is no picture, no sound but your receiver is still active and the
display indicates the time or

In low power mode, your receiver is off and the

button indicator is lit in red.

Your receiver is in low power:
- Press P+, P-, or TV/RADIO either on the remote control or front panel, or press

any number key on the remote control to switch to standby.

Your receiver is in standby:
- Press P+, P-, or TV/RADIO either on the remote control or front panel, or press

any number key on the remote control to switch the receiver on.

You are watching digital TV or listening to digital radio.
- To put your receiver in stand-by, press

either on the remote control or front panel.

- To put your receiver in “low power”, press

for 2 seconds either on the remote

control or front panel.

Although it is recommended to switch your receiver to “low power” when not using
it so as to save energy, bear in mind that update functions are not supported in “low
power”.Thus you should allow your receiver to remain in standby regularly (at least
once a week) so as to enable updates.

9.2 Switching from watching digital TV

to listening to digital radio

To switch your receiver from digital TV to digital radio and from digital radio to digital
TV:
- Press TV/RADIO either on the remote control or on the front panel.

9.3 Changing channels while watching digital

TV or listening to digital radio

9.3.1 Using number keys of the remote control

- Dial a number using the remote number keys to tune the corresponding channel.

9.3.2 Using P+/P- keys of the remote control

or P+/P- buttons of the front panel

- Press P+ to tune the next channel in the current channel list.
- Press P- to tune the previous channel in the current channel list.

9.3.3 Using channel lists

To select a channel from a channel list:
- Press LIST to display the current channel list (either the main TV list or the

bouquet list previously selected).

- Press LIST repeatedly to display the list you want to select.
- Scroll to the channel you want to tune using the

U or I key. Scroll from one page

to another using the

remote control key.

- Press OK to confirm your choice.You can preview the channel on the right hand

9 Day-to-day operation