beautypg.com

Philips DCR 9001/22 User Manual

Page 19

background image

67

EN

7.1.3 Digital audio connections

Depending on your audio equipment, you have several options to connect your digital receiver.

CONNECTION (A)
Either
Connect the “SPDIF” digital audio output socket to the relevant input socket of your audio equipment using an optical cable (not
supplied). Consult the user manual of your audio equipment to locate the proper digital audio input.

(1)

CONNECTION (B)
Or
Connect the audio “DIGITAL” output socket to the relevant digital audio input socket of your audio equipment using a single
CINCH cable (not supplied). Consult the user manual of your audio equipment to locate the proper digital audio input.

(1)

(1)

With either connection, you can only control the volume (up/down and mute) using your audio equipment remote control; refer to the user
manual of your audio equipment.To perform volume control using your receiver remote control, refer to the remote control user manual.

When using one of these digital audio connections, you may experience a de-synchronisation between sound and pictures
(Lip synchronisation).To restore synchronisation, change the Lip Synchronisation setting as described in paragraph 9.7.

7.2 Connecting to a video projector to watch Digital TV

7.2.1 Your video projector is only SDTV capable

Connect the “EXT1” SCART socket of your digital receiver to your video projector.
Video projectors are often fed with S-Video format video signals. If this is the case with your projector, follow the instructions
below for connection and installation:
- Connect a SCART/S-Video adapter to the “TV” SCART of your receiver (not supplied), and connect the adapter to the S-Video

input of your video projector by means of a S Video cable.

- Installation: refer to chapter 13.5.2 to change the “TV/VCR output” setting of your digital receiver to S-VIDEO/PAL-CVBS.

7.2.2 Your video projector is HDTV capable (YPbPr, DVI, or HDMI interface)

Connect the HDMI, DVI, or YPbPr socket of your digital receiver to the corresponding input on your video projector.

A

B

Digital Audio equipment

Electrical

digital input

Optical

digital input

Cable Receiver