beautypg.com

300997-141 quickstart™ guide, Quickstart, 21 efx – Precor EFX 5.23 User Manual

Page 13

background image

QUICKSTART™

CAUTION: Before using the EFX, read all these
instructions. Failure to do so may result in serious injury.

Do not allow children or those unfamiliar with its

operation, on or near this equipment.

Before beginning any fitness program, see your

physician for a thorough physical examination.
Seek advice from your physician to learn the
target heart rate appropriate for your
fitness level.

Always face the display and use the

stationary handrail for balance. Never
attempt to turn around on the EFX.

If you feel pain, faintness, or dizziness,

stop exercising immediately.

The Locking Pin on the
Roller Arm

The locking pin on the EFX
ramp secures the roller arm
from use. To prevent unauthorized
use, secure the roller arm with the
locking pin after every workout.

Pull firmly on the pin to slide it
out of the roller arm. A lanyard
attaches the locking pin to
the ramp. Store the locking
pin underneath the ramp
once it is removed from
the roller arm.

Workout Tips

Before and after an exercise session, gently

stretch your lower body and back to help prevent
stiffness or soreness.

At the beginning of an exercise session, take

several minutes to bring your heart rate into your
target zone (shown in Diagram A on the other side
of this card).

To display your heart rate, use both hands to grasp

the touch-sensitive grips.

To pause during your workout, stop pedaling. Pause

mode has a 10-minute time limit.

Incorporate a cool-down period into your exercise

session to help lower your heart rate and minimize
muscle stiffness and soreness.

Begin Your Workout with QUICKSTART

To begin exercising immediately without personalizing your exercise
session, take the following steps.

1. Turn On the EFX using the power switch located at the rear of the

unit, near the power cord.

2. Remove the locking pin that secures the roller arm.

3. Manually adjust the ramp to your preferred incline

4. Hold on to the stationary handrail and step on the foot pedals.

5. Begin pedaling. Maintain a comfortable stride rate between 100

and 150 strides per minute depending on your level of fitness.

6. Press QUICKSTART and the Manual Program begins. An exercise

session goal of 30 minutes appears in the TIME display and
counts down.
Note: To select a different program, refer to your owner’s manual.

7.

When you reach the time goal, you automatically enter a
cool-down period. After you complete the cool-down period, the
equipment displays a summary of your exercise session statistics.
If you used the touch-sensitive grips during your workout, your
average heart rate appears in the display as well.

8. Stop pedaling and hold on to the stationary handrail while you

carefully step down from the EFX.

9. To prevent unauthorized use, turn Off the EFX and secure the

roller arm with the locking pin.

EFX 5.21/5.23 QSC 300997-141, July 2011, en

EFX

®

5.21

EFX

®

5.23





This manual is related to the following products: