Patton electronic 4110 Series User Manual
G o c ard

1
GoCard
__
Product Model
SmartNode 4520 Series and 4110 Series
Product Name
ToIP - Telephony over IP Gateway-Router or Gateway only
Status
1-July-04 SmartWare 3.10 including FXO
Who is the customer for the SmartNode 4000 Series?
The typical applications for the
SmartNode 4520 Series are
remote-office, home-office and
branch-office networking as well as
voice-data broadband carrier
access. Consequently the potential
customers are companies with
multiple national and international
locations and a demand for home-
office connectivity as well as
System Integrators serving these
companies.
On the service provider side, ISP's
and CLECS providing broadband
access (DSL, Cable, Fibre, WLL) are
target customers.
SmartNode 4000 Series Abstract
The SmartNode 4520 series are fully featured IP QoS and VPN Routers with integrated POTS VoIP
Gateways. The products offer 2, 4, 6 or 8 FXS and 2 or 4 FXO ports (model dependent) and dual
10/100 Ethernet. They support the standard VoIP protocols H.323 and SIP.
The combination of router and media-gateway allows customers to connect their telephony
(Phones, Faxes, PBX's) and LAN (PCs etc.) equipment over a single IP WAN (Internet, VPN) with
maximum voice quality and optimum bandwidth usage.
This combination of advanced IP QoS and state of the art VoIP is usually found only in much bigger and
more expensive equipment or requires the combination of several boxes (VoIP gateway, access router,
VPN-box). In particular the DownStreamQoS™ feature is a unique selling proposition for this class of
equipment.
As opposed to the 4520 Series the 4110 do not have integrated routing and traffic
management functions. They can therefore be used as cost-effective complements to already
installed IP routers.
The SmartNode 4110 series are pure analog VoIP Media–Gateways. They offer 2, 4, 6 or 8 FXS or
FXO ports (model dependent) and a single 10/100 Ethernet port and support the standard VoIP
protocols H.323 or SIP (MGCP is planned).
The SmartNodes 4110 Series are customer premise endpoints used as POTS-to-VoIP Media Gateways or
POTS over IP/Ethernet extenders. This allows customers to integrate their analog telephony equipment
(POTS terminals, faxes, PBX's, etc.) into VoIP networks, they can realize FXS extensions over Ethernet
and toll bypass over an IP WAN.