Set date and time, Basic operations of your id937, Make a call – Philips ID937 User Manual
Page 18: Answer or end a call, Switch the handset on/off, Keypad lock/unlock, Paging, Install
18
ID937_IFU_EN_US.book Page 18 Thursday, February 8, 2007 4:16 PM
EN
Install
Set date and time
1. Press
m
MENU
.
2. Scroll
:
to
Clock & Alarm
and press
m
SELECT
.
3. Press
m
SELECT
to enter
Set Date/Time
.
4. Enter the current time (HH:MM). Press
2
to select
AM
or press
7
to select
PM
.
5. Enter the current date (DD/MM/YY).
6. Press
m
OK
to confirm.
Now, you are ready to use your phone.
Basic operations of your ID937
Make a call
Enter the phone number (maximum 20 digits) and press
r
to dial the number.
For details, please refer to "Make a call" on page 20.
Answer or end a call
Press
r
key to answer a call.
Press
e
key to end a call.
For details, please refer to "Answer a call" on page 20 and "End a call" on page 21.
Switch the handset on/off
Press and hold
e
key for 3 seconds to switch off the handset in stand-by mode.
Short press
e
key to switch on the handset again.
j
Keypad lock/unlock
Press and hold
F
key for 2 seconds to lock or unlock the keypad in stand-by mode.
Paging
The paging feature enables you to locate a missing handset if the handset is in range and contains charged
batteries.
Short press
p
key on the base. The handset starts to ring.
Once retrieved, press any key on the handset to end the paging.
WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may
be updated after each call. The availability of date & time update is dependent on your network
provider. Please check the date & time settings in your ISDN system or contact your network
provider.