Philips VR 969/02 User Manual

Page 22

Programming with TXT pages

With the help of the remote control handset, the on-
screen user's guide and the page memory, TIMER
programming is considerably facilitated. The general
use of the TXT decoder is to be found in the chapter
"Additional functions" later in this booklet.

You can programme with the buttons on the video
recorder and/or on the remote control handset.
Be sure you have inserted a cassette without erase
protection.

Switch on the TV set and select the programme
position intended for the video recorder.

On the video recorder, select the TV programme
position from which you wish to make TIMER
recordings.

Press the l button.

Select the option "Easy Textprogramming". Confirm
with the G button.

The OSD page "EASY TEXTPROGRAMMING"
appears on the picture screen. The last selected
programme position (e.g. "01 ARD") and a page
number (e.g. "301") are highlighted.

Select the programme position from which you
wish to record. If necessary, select another page
number.

Start TXT programming with the B button.
The TXT page appears on the picture screen.
The starting time of the first TV programme is
marked by a cursor

■

If the cursor

■

does not appear (e.g. on subpages),

press the B button.
If necessary, select another page number.

(

Select the desired TV programme.
The cursor

■

marks the start time of the selected

TV programme.

)

Confirm with the B button.
The picture screen and the video recorder's display
indicate the TIMER data.

If you wish to programme daily or weekly
recordings, select the line "daily" or "weekly" using
the p button.
Either "D" or "W" also appears beside the date. Daily
recordings can only be programmed for the week-
days Monday to Friday.

Press the G button.
If you wish that "subtitles" are also recorded, press
the p button . Enter the number of the sub-
titles page as three digits with the numeric
buttons O.

Confirm with the B button.
"Timer ready" appears briefly in the screen display.

If you wish to programme further recordings, restart
with step

Terminate programming with the d
button. The symbol "

" appears in the video recor-

der display. It indicates that a TIMER has been pro-
grammed.

Notes:
* If "SET CLOCK" appears in the display, the inter-
nal clock of the video recorder is not set. Set the
clock.
* If "DAILY ERR" appears in the display, you have
programmed a TV programme with the first recor-
ding on a Saturday or Sunday as "daily". This is not
possible.
* Daily recordings can only be programmed for the
weekdays Monday to Friday.
* For "daily/weekly" programming, the first
recording must be scheduled within one week.

EASY TEXTPROGRAMMING

Programme

Page

01 ARD

301

302

303

304

02 ZDF

100

03 RTL

100

04 SAT1 100

100

Select programme -

Enter page - SELECT

Textprog. - OK

Select page -

< >

Exit - MENU