Panasonic AJ-SD930BE - Manual (Page 74)

74 (E)
CONTENTS
RS-232C interface
5. Command table
$ Commands relating to operation control
O
As for the return (completion) message, [ACK] is
first returned when data is received, and the
execution message is subsequently returned. It
is only the execution message which is listed in
this table.
O In the case of commands not listed in the table,
ER001 (invalid command) is returned after [ACK]
has been returned.
VTR
operation
Send command
STOP [STX] OSP [ETX] 45 [STX] OSP [ETX]
This command is for stopping the tape travel.
Return (completion)
message
STANDBY
OFF [STX] OBF [ETX] 45 [STX] OBF [ETX]
This command is setting the VTR to standby
OFF.
STANDBY ON [STX] OBN [ETX] 45 [STX] OBN [ETX]
This command is setting the VTR to standby ON.
VTR
operation
Send command
SHTL
FORWARD [STX] OSF:data [ETX] 45 [STX] OSF [ETX]
This is the forward direction shuttle command.
data = n : speed data
0 : STILL
1 : a0.03
2 : a0.1
3 : a0.2
4 : a0.5
5 : a1
6 : a1.85
7 : a4.1 (a3.1)
8 : a9.5
9 : a16
A : a32
O The a16 anda32 speed differ according to the
setting selected for setup menu No. 101 (SHTL
MAX).
O The value for the DV/DVCAM tape is shown in
parenthesis ( ).
Return (completion)
message
SHTL
REVERSE [STX] OSR:data [ETX] 45 [STX] OSR [ETX]
This is the reverse direction shuttle command.
data = n : speed data
0 : STILL
1 : a0.03
2 : a0.1
3 : a0.2
4 : a0.43 (a0.5)
5 : a1
6 : a1.85
7 : a4.1 (a3.1)
8 : a9.5
9 : a16
A : a32
O The a16 anda32 speed differ according to the
setting selected for setup menu No. 101 (SHTL
MAX).
O The value for the DV/DVCAM tape is shown in
parenthesis ( ).
EJECT [STX] OEJ [ETX] 45 [STX] OEJ [ETX]
This command is for ejecting the cassette tape.
The resulting output picture and sound statuses
differ according to the settings selected for the
setup menu No. 105 (AUTO EE SEL) and the
setup menu No. 111 (FRZ MODE SEL).
PLAY [STX] OPL [ETX] 45 [STX] OPL [ETX]
This command is for starting playback.
REWIND [STX] ORW [ETX] 45 [STX] ORW [ETX]
This command is for rewinding the tape.
The resulting output picture and sound statuses
differ according to the settings selected for the
setup menu No. 105 (AUTO EE SEL).
The maximum tape speed differs according to the
setting selected for setup menu No. 102 (FF.
REW MAX).
FAST
FORWARD [STX] OFF [ETX] 45 [STX] OFF [ETX]
This command is for fast forwarding the tape.
The resulting output picture and sound statuses
differ according to the settings selected for the
setup menu No. 105 (AUTO EE SEL).
The maximum tape speed differs according to the
setting selected for setup menu No. 102 (FF.
REW MAX).
REC [STX] ORC [ETX] 45 [STX] ORC [ETX]
This command is for starting the recording.