Planet Technology ISDN Internet Telephony PBX System IPX-1800N - Manual (Page 18)

PLANET IP PBX user’s manual
3 Service Configuration
This section describes details to configure various services built in the PLANET IP PBX.
3.1 NTP Service
Select Service -> NTP Service to specify a NTP server for network time synchronization. You can
enable or disable NTP service at any time.
Enable NTP Service
1. Click Enable.
2. Select Automatic check box to use server pool at
pool.ntp.org; or, enter a fully qualified domain name or the
IP address of a NTP server.
3. Click APPLY.
Disable NTP Service Click Disable, and click APPLY.
3.2 SNMP Service
Select Service -> SNMP Service to specify Simple Network Management Protocol (SNMP)
parameters for network status retrieval. You can enable or disable SNMP service at any time.