Pioneer PDP-4270XD - Manual (Page 51)

Using with other equipment 12
51
En
English
Connecting an amplifier/AV receiver
You can enjoy more powerful sound by connecting an amplifier or AV
receiver to the plasma television.
Note
• For details, refer to the operation manual for the audio equipment
to be connected.
• Audio signals synchronizing with currently displayed images are
always output to the AUDIO OUTPUT terminals.
• While in DTV mode, no signals are output if they are copy guarded.
Using the HDMI Input
The INPUT 3 terminals include an HDMI terminal to which digital video
and audio signals can be input. To use the HDMI terminal, activate the
terminal and specify the types of video and audio signals to be received
from the connected equipment. For the types of these signals, see the
operation manual that came with the connected equipment.
Before starting the menu, press INPUT 3 on the remote control unit or
press INPUT on the plasma television to select INPUT 3.
For audio, the system supports the following:
• Linear PCM (STEREO 2ch)
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Note
• PC signals are not compatible with the HDMI terminal.
• It may take a short while until the image is displayed, depending
on the equipment connected.
Connecting HDMI equipment
Activating the HDMI terminal
1 Press HOME MENU.
2 Select “Option“ ( / then ENTER).
3 Select “HDMI Input“ ( / then ENTER).
4 Select “Setting“ ( / then ENTER).
5 Select “Enable“ ( / then ENTER).
6 Press HOME MENU to exit the menu.
To specify the type of digital video signals:
1 Repeat steps 1 to 3 provided for “Activating the HDMI
terminal“.
2 Select “Video“ ( / then ENTER).
Input signal table
1920 x 1080i@50 Hz
720 x 576p@50 Hz
1280 x 720p@50 Hz
720(1440) x 576i@50 Hz
1920 x [email protected] Hz/60 Hz
720 x [email protected] Hz/60 Hz
1280 x [email protected] Hz/60 Hz
720(1440) x [email protected] Hz/60 Hz
1920 x 1080p@24 Hz
Rear view
3
Amplifier/AV receiver Stereo
audio cable
Optical digital
audio cable
Item Description
Disable (default) Deactivates the HDMI terminal.
Enable Activates the HDMI terminal.
Rear view
3
HDMI device
SCART cable
(for analogue audio)
HDMI cable carrying
the HDMI mark
PDP4270XD_En.book Page 51 Friday, June 16, 2006 5:32 PM