05 preparation, Installing the plasma television, Moving the plasma television – Pioneer PDP-4270XD User Manual
Page 15: Preparation
Preparation
05
15
En
English
Chapter 5
Preparation
Installing the plasma television
Location
• Avoid direct sunlight. Maintain adequate ventilation.
• Because the plasma television is heavy, be sure to have someone
help you when moving it.
Caution
• If you do not leave sufficient space above the plasma television, it
will not receive enough ventilation and will not operate properly.
Note
• Allow enough space around the upper and back parts when
installing to ensure adequate ventilation of the rear of the unit.
Caution
Operating Environment
Operating environment temperature and humidity: +0 ºC to +40 ºC;
less than 85 % RH (cooling vents not blocked). Do not install this unit
in a poorly ventilated area, or in locations exposed to high humidity or
direct sunlight (or strong artificial light).
Moving the plasma television
When installing on a rack, etc., hold the plasma television as shown
below.
Over 50 cm
Over
10 cm
PDP4270XD_En.book Page 15 Friday, June 16, 2006 5:32 PM