Precor Low Impact M9.33 - Manual (Page 43)

Owner’s Manual: Advanced Programming and Troubleshooting 41
6. When you are ready, press ENTER to move to the next
display (error log).
Viewing the Error Log
ERROR LOG appears on the display followed by the
first entry in the error log if there are any errors. Up to ten
error codes can be retrieved.
If there are no errors in the log, you will see NO
ERRORS displayed.
7. To view any additional error codes in the error log, use
the arrow keys. Each error code specifies when it
occurred, listing the odometer and hour meter values.
Refer to Diagram 10.
Diagram 10: Error log
8. Copy the error code information to paper so you can
provide it to Customer Support if needed. Be sure to
copy it exactly as shown.
9. When you no longer need the information in the error log,
press QUICKSTART to erase the error log. While the
error log is displayed, maintain light pressure on the
QUICKSTART key until CLEAR, and then OK appears.
Important: You cannot retrieve the error log once you
have cleared it. You may want to resolve any issues you
are experiencing with the treadmill before clearing the
error log.
10. When you are ready, press ENTER to move to the next
display (serial number).
1: ER33 AT 12,345,678 MILES 1,714 HOURS
Most recent error
Error code
The hour meter at the time
the error was detected.
Odometer reading at the
time the error occurred.