Precor Low Impact M9.33 - Manual (Page 22)

Owner’s Manual: Display Console 20
To add an item to the scanning process:
• Lightly tap the SELECT key until the appropriate indicator
lights up. You must then press and hold the SELECT key
for at least two seconds. The indicator light blinks until you
release the key. During the next scan, the LED lights and
the associated information appears.
To turn off an indicator light and remove the item from
the scanning process:
• When the indicator light next to the item is lit, press and
hold the SELECT key for at least two seconds. The
indicator light blinks until you release the key. The next
time the treadmill performs a scan, the indicator remains
blank and the associated information does not appear.
15:32 1.8
Select TIME, DISTANCE, CALORIES, or INCLINE with
the left SELECT key.
Select PROFILE, CALORIES/MINUTE, METS, or
SPEED with the right SELECT key.