Philips ThumbCam DMVC1300K - Manual (Page 21)

> starts blinking.
4 Within five seconds, press Shutter button to confirm that you wish to clear the last stored
photo/video recording.
> You will hear a beep once.The last stored photo/video recording has now been cleared
from the memory.
Clearing all photos/video recordings
1
Make sure the camera is turned on.
2 Press the Mode button until appears on the display.
3 Press the Shutter button to enter Clear All mode.
> starts blinking.
4 Within five seconds, press the Shutter button to confirm that you wish to clear all
photos/video recordings from the memory.
> You will hear a beep once. All photos/video recordings have now been cleared from the
memory.
Transferring photos/video clips to your laptop
1 Be sure the laptop is turned on and that ‘ThumbCam drivers’ and
‘Philips Photo Manager’ are installed on your laptop.
2 Connect the camera to the laptop, either directly or via the laptop clamp.
See’ Connecting the camera to your laptop’.
> The camera turns on automatically and the display shows .
US8
CA
CA
CL
ENGLISH 21